eni i-Ride Touring 4T series is a top performance multigrade lubricant of latest technology for four-stroke bike engines. It satisfies the demand of engines under the most severe and varied operating conditions, such as high temperature motorway driving or low temperature stop and go.
Viscosity Grades: SAE 10W-40
eni i-Ride 2T sml is the lubricant for 2 stroke engines installed on scooters, motorbikes and auxiliary terrestrial equipment. It is dyed blue using a specific additive package to impart optimal service performance in air cooled or water cooled two-stroke engines.
i-Ride 2T sml is formulated with synthetic technology base oil, ensuring moreover low exhaust smoke. It is suitable for use in both premix and self-mixing applications.
Kart 2T is a racing lubricant, based upon a blend of synthetic basestocks, castor oil and a particularly tailored additive system, expressly formulated for 2 stroke kart engines either water or air cooled that run at high RPM.
eni Gear MG 85W-140 is a special EP (Extreme Pressure) lubricant with API GL-4 and GL-5 specifications and has been specifically designed for lubricating gears and final drives in motorbikes running under particularly heavy conditions and subjected to dynamic loads and high operating temperatures. This oil is especially designed for lubricating the rear bevelbox of shaft transmissions on MOTO GUZZI models.
eni Gear MG/S 85W-90 is a special gear oil with modified EP (Extreme Pressure) characteristics. It Possesses exceptional properties that make it suitable for lubricating motorbike gearboxes, including those with wet clutches. This oil is specially designed for lubricating MOTO GUZZI gearboxes.
eni Fork Oil is a series of oils from a high Viscosity Index base stock and additive package, expressly formulated for use in forks and shock absorbers of both, street and off-road motor bikes.
eni Brake Fluid DOT 4 is a yellow-coloured liquid, expressly formulated for use in all disc and drum brake systems and in clutch control systems. It is specifically recommended where the brake system is subject to very severe operating conditions.
CAUTION: DO NOT MIX BRAKE FLUID DOT 4 WITH BRAKE FLUID DOT 5.1
eni Brake Fluid DOT 5.1 is a very high performance synthetic fluid. It is suitable for use in low ambient temperatures, but with its extremely high boiling point, it is often used in motorcycle and motor sport situations where prolonged braking actions might overheat the braking system.